China Manufacturers All Welded Single Effect Forced Circulation Mvr Evaporator For Wastewater
Introduction
Mechanical vapor recompression (MVR) evaporator uses two steam generated in the evaporator, the compressor, pressure, temperature, enthalpy increase, and then sent to the heating chamber of the evaporator as heating steam, feed liquid to maintain the boiling state, and heating steam is condensed into water. In this way, the original steam abandoned has been fully utilized, the latent heat recovery, and improve the thermal efficiency and economy of steam is equivalent to 30 effect evaporation, reducing the external heating and cooling resource demand, reduce energy consumption, reduce pollution.
| Name | MVR evaporator/New product Industrial mvr evaporator |
| Material | SUS304L/316L/Titanium alloy |
| Vacuum degree | Adjustable |
| Rotary flask | Customzied |
| Rotating Speed | 0~180rpm |
| Main uses | Industrial Distillation,concentration, Crystallization |
| Sealing | PTFE |
| Condenser | Vertical |
| Product Keywords | energy saving MVR evaporator,MVR industrial evaporator |
Usage
Mechanical vapor recompression (MVR) evaporator, suitable for low temperature concentration in milk, glucose, organic acid, VC, xylose, pharmaceutical, chemical, biological engineering, environmental engineering, waste recycling, papermaking, salt and other industries.
Main Characteristic
1. MVR energy-saving evaporator technology is currently the most advanced technology of the evaporator, only need a very small amount of steam (start-up small steam, in normal operation, almost no need for steam), greatly reduces the enterprise operation cost, reduce the pollution of the environment.
2.due to the use of the compressor to provide heat sources, compared with the traditional evaporator, the temperature difference is much smaller, can achieve moderate evaporation, greatly improve product quality and reduce fouling.
3. Without the condenser or only a small area of condenser, the structure and process are very simple, fully automatic operation, continuous operation, safe and reliable.
4. equipped with CIP cleaning pipeline, can be achieved on-site cleaning, the whole set of equipment is easy to operate, no dead angle.
5. the evaporator is the material at low temperature (evaporation temperature 35 degrees -100 degrees Celsius), and no foam in the state of evaporation, uniform liquid, no running material, not easy to coke, material heating denaturation minimum.
Technical characteristics
1,Low energy consumption,low operation cost
2,Small space occupation
3,Require fewer public utilities and less total investment
4,Stable operation and high degree of automation
5,Require no primary steam
6,Short retention time due to frequently used single effect
7,Simple process,high practicability,and excellent service performance at some loads
8,Low operation costs
9,Capable of evaporating at and below 40 celsius without any refrigerating plant and therefore particulary suitable for heat sensitive materials.
Machining & Assembling Workshop
Tag: energy saving MVR evaporator;MVR industrial evaporator
